Rs-online
Round
Nature
Aluminium
Ø 35 mm
Flush
Panel mounting
Ø 30 mm
2 NO
500 V AC @ 10 A
Screw terminal
Slow-make switching element
Gold
Maintained - Rest (a)
IP65
Rs-online
Keylock rotary switch, Series 04, Ø 35 mm, Flush, 2 NO, Screw terminal
- 704.123.118KN
- 704.911.3
- Terminal
- Switching rating
- Contact material
- Switching system
- Contacts configuration
- Product Status:
- Not Recommended for new design
- HMI function:
- Keylock rotary switch
- Series:
- Series 04
- Front dimension:
- Ø 35 mm
- Front form:
- Round
- Front bezel colour:
- Nature
- Front bezel material:
- Aluminium
- Design:
- Flush
- Mounting cut-out:
- Ø 30.5 mm
- Mounting type:
- Panel mounting
- Switching voltage and switching current:
as per DIN EN IEC 60947-5-1
voltage
DC13
AC15
24 V
4.0 A
8.0 A
60 V
1.5 A
8.0 A
110 V
1.0 A
120 V
8.0 A
230 V
0.4 A
7.0 A
400 V
0.2 A
5.0 A
500 V
0.15 A
4.0 A
as per UL 60947-5-1
voltage
power
24 VDC
4.0 A, Pilot duty
60 VDC
1.5 A, Pilot duty
120 VDC
1.0 A, Pilot duty
240 VDC
0.4 A, Pilot duty
415 VDC
0.2 A, Pilot duty
480 VDC
0.14A, Pilot duty
120 VAC
8.0 A, Pilot duty
240 VAC
7.0 A, Pilot duty
415 VAC
5.0 A, Pilot duty
480 VAC
4.0 A, Pilot duty
For voltages greater than Ue = 400 V,
the grid dimensions must not be
less than 35 mm x 50 mm.
- Contacts configuration:
- 2 NO
- Switching rating:
- 500 V AC @ 10 A
- Electrical lifetime:
- 50 000 cycles of operation
- Thermal current Ith:
- 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.
- Terminal:
- Screw terminal
- Contact material:
- Gold
- Switching action:
- Maintained - Rest (a)
- Switching system:
- Slow-make switching element
- Tightening torque:
- Screw terminal 0.5 Nm
- Total weight:
- 0.124 kg
- IP front protection:
- IP65
- Operating temperature:
- – 40 °C … + 55 °C
- Vibration resistance:
- 100 m/s² at 10 Hz … 500 Hz, amplitude 0.75 mm, (sinusoidal according to DIN EN 60068-2-6)
- max. number of switching elements:
- 1
- Wiring diagrams:
- Front dimension:
- Ø 35 mm
- Front form:
- Round
- Front bezel colour:
- Nature
- Front bezel material:
- Aluminium
- Design:
- Flush
- Mounting cut-out:
- Ø 30.5 mm
- Mounting type:
- Panel mounting
- Switching action:
- Maintained - Rest (a)
- Weight:
- 0.098 kg
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
- Short Description:
- Actuator, Ø 30.5 mm, Ø 35 mm, Round, Nature, Aluminium, Maintained - Rest (a)
- Hints:
- The standard lock Ronis 251
- max. number of switching elements:
- 1
- Mounting cut-outs:
- Dimension drawings:
1 = Kraus & Naimer switching element
A = (Number of stages x 12) + 66.5 mm
2 = Santon switching element
B = (Number of stages x 13.5) + 65.5 mm
- Product Status:
- Not Recommended for new design
- successor product:
- https://www.eao.com/c/704.911.3-1
- Switching voltage and switching current:
as per DIN EN IEC 60947-5-1
voltage
DC13
AC15
24 V
4.0 A
8.0 A
60 V
1.5 A
8.0 A
110 V
1.0 A
120 V
8.0 A
230 V
0.4 A
7.0 A
400 V
0.2 A
5.0 A
500 V
0.15 A
4.0 A
as per UL 60947-5-1
voltage
power
24 VDC
4.0 A, Pilot duty
60 VDC
1.5 A, Pilot duty
120 VDC
1.0 A, Pilot duty
240 VDC
0.4 A, Pilot duty
415 VDC
0.2 A, Pilot duty
480 VDC
0.14A, Pilot duty
120 VAC
8.0 A, Pilot duty
240 VAC
7.0 A, Pilot duty
415 VAC
5.0 A, Pilot duty
480 VAC
4.0 A, Pilot duty
For voltages greater than Ue = 400 V,
the grid dimensions must not be
less than 35 mm x 50 mm.
- Contacts:
- 2 NO
- Rated impulse withstand voltage Uimp:
- 4 kV, according to EN/IEC 60947-5-1
- Rated insulation voltage Ui:
- 500 V
- Recommended minimum operational data:
Gold-silver contacts
Voltage
24 VDC
110 VDC
Current
5 mA
2 mA
Hard silver contacts
Voltage
24 VDC
110 VDC
Current
50 mA
10 mA
- Switching rating:
- 500 V AC @ 10 A
- Electrical lifetime:
- 50 000 cycles of operation
- Pollution degree:
- 3
- Standards:
- The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1
- Thermal current Ith:
- 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.
- Terminal:
- Screw terminal
- Contact material:
- Gold
- Switching system:
- Slow-make switching element
- Switching system:
- The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.Slow-make contacts with forced action are ideal for high switch ratings.
- Operating force:
- 1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
- Tightening torque:
- Screw terminal 0.5 Nm
- Wire cross section:
- Max. wire cross-section 2 mm x 2.5 mm²Skinning wire 10 mmMax. wire cross-section of stranded cable 2 x 1.5 mm²use stranded wires only with wire end ferrules of 10 mm lengthOnly one polarity is allowed on each side when wiring.
- Weight:
- 0.027 kg
- IP Protection:
- IP20
- Operating temperature:
- – 40 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 300 m/s², pulse width 11 ms, 3-axis, (single impacts, semi-sinusoidal as per DIN EN 60068-2-27)
- Vibration resistance:
- 100 m/s² at 10 Hz … 500 Hz, amplitude 0.75 mm, (sinusoidal according to DIN EN 60068-2-6)
- Climate resistance:
- Relative humidity, max. 95%, non-condensing
- Approbations:
- CB (IEC 60947-5-1), cULus, DNV, EAC, NFF, VDE
- Conformities:
- CE, CCC, UKCA
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
- Short Description:
- Switching element - Not recommended for new design, Slow-make switching element, 500 V AC @ 10 A, Gold, 2 NO, Screw terminal
- Hints:
- When using the switching element, the application guidelines must be observed.For the third switching element the terminal marking insert is to be ordered separatelyOperating temperature: Other temperatures on request
- Special requirements:
Special requirements for positive-opening auxiliary current switches
Positive opening travel
Emergency stop 12.5 mm
Minimum force
Emergency stop 50 N (actuating force at
which is safely switched)
Max. travel
Emergency stop 12.5 mm
- Wiring diagrams:
- Dimension drawings:
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm